Luxon 4-Post Bar Mounts - Gas Gas, Husqvarna, KTM & Triumph 2016-2027
Luxon lightweight 4-post bar mounts eliminate twisting due to small crashes and tip-overs without sacrificing vibration absorbtion like a solid mount would. Four sets of bushings absorb vibration, hard hits, and track roughness without compromising steering precision. Three different rubber bushing sets (soft, medium, and firm) are included to fine tune the feel.
These bar mounts fit many KTM, Husqvarna, Gas Gas, and Triumph triple clamps as well as all Luxon Gen2 triple clamps. Please read fitment details below for more details. They have the same bar position geometry as stock KTM (height and offset).
Handlebar size is standard 1 1/8".
Fitment
See images for KTM Cone interface; The KTM Cone interface is a tapered cone shaped hole on the top and bottom of the triple clamp (a cross section would look like an hour glass). The 2023+ version is identical to the 2016-2022 version, except it includes a counterbore for a flange on the top. Our bar mounts fit either version: they do not interface with the flange cutout, but rather the cone surface as it is more accurately machined and stronger. Triumph clamps use the same 2016-2022 KTM cone interface, though it is raised 5 mm above the top clamp surface.
Fitment:
These mounts fit stock triple clamps with the KTM rubber cone interface, which includes many KTM, Husqvarna, Gas Gas, and Triumph models, and all Luxon Gen2 triple clamps.
Depending on the installation type, make and model of bike, bar mount position, etc., you may need to lightly trim plastic brackets and/or relocate hour meters or accessories to allow clearance for these bar mounts in some mount positions. The 2023-2026 KTM/Husqvarna and 2024-2026 Gas Gas will require relocation of the hour meter with the bars in the furthest forward position (you can simply swap it to the other bolt hole). Always check for full clearance after installation and before riding.
Bar Size
Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars).
Luxon do not offer bar mounts to fit the old 7/8" size handlebars. BRP and other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.
These bar mounts fit nearly all KTM/Husqvarna/Gas Gas big bikes, 2024 and newer. They also fit many older KTM/Husqvarna/Gas Gas big bikes, as well as Triumph bikes. The list below includes bikes that Luxon mounts should fit; there may be more bikes not listed that our mounts will fit too. While the list is accurate as far as we know, mistakes can happen! Please double check that your bike has an KTM Cone interface as explained above & images.
GASGAS
EC 125 2025
EC 250 2024-2025
EC 250F 2024-2025
EC 300 2024-2026
EC 350F 2024-2026
EC 450F 2024-2025
EC 500F 2024-2026
EX 250 2024
EX 250F 2024-2025
EX 300 2024-2026
EX 350F 2024-2025
EX 450F 2024
MC 125 2024-2027
MC 150 2025
MC 250 2024-2026
MC 250F 2024-2027
MC 300 2025
MC 350F 2024-2025
MC 450F 2024-2027
HUSQVARNAFC 250 2016-2027
FC 350 2016-2025, 2027
FC 450 2016-2027
FE 250 2024-2027
FE 350 2024-2027
FE 450 2024-2027
FE 501 2024-2027
FX 350 2017-2025, 2027
FX 450 2017-2024, 2027
TC 125 2016-2027
TC 150 2025
TC 250 2016-2027
TC 300 2025, 2027
TE 125i 2025
TE 150i 2024-2025
TE 250i 2024-2025
TE 300i 2024-2026
TX 125 2017-2018
TX 300 2017-2019
TX 300i 2020-2027
KTM125 SX 2016-2027
125 XC 2023
125 XC TBI 2024-2027
150 EXC TBI 2024-2025
150 SX 2016-2022, 2025
250 EXC-F 2024-2027
250 EXC TBI 2024-2025
250 SX 2016-2027
250 SX-F 2016-2027
250 XC TBI 2024-2027
250 XC TPI 2020-2023
250 XC-F 2016-2027
300 EXC TBI 2024-2027
300 SX 2023-2027
300 XC TBI 2024-2027
300 XC TPI 2020-2023
350 EXC-F 2024-2027
350 SX-F 2016-2027
350 XC-F 2016-2025, 2027
450 EXC-F 2024-2027
450 SX-F 2016-2027
450 XC-F 2016-2027
500 EXC-F 2024-2027
TRIUMPHTF 250-C 2027
TF 250-E 2026-2027
TF 250-X 2024-2027
TF 450-C 2027
TF 450-E 2026-2027
TF 450-RC 2025
TF 450-X 2026-2027Description
These mounts are the stock KTM height of 25 mm (bottom of bar to top of triple clamp) and offset (7 mm of bar position change when flipping the mounts around). They are also the stock Triumph height of 30 mm (bottom of bar to top of triple clamp, including the 5 mm step in the triple clamp), but have slightly less throw front to back (7 mm vs. 9 mm with the stock Triumph). Includes rubber isolated lower bar mounts, rubber bushings, upper bar clamps, high-strength steel mount and clamp bolts, anti-seize, and instructions.
Three different hardness levels of rubber bushings are included at no additional cost. Soft (green) is for lighter riders, vet riders, or those with wrist injuries. Medium (yellow) is recommended for most off-road and motocross use, and hard (red) is recommended for aggressive motocross use and faster riders.
Bushings will "break in" on the first ride and become a little softer than when first installed. Like all rubber bushings, these are wear items and will eventually break down and need replacing. Softer bushings will need to be replaced more often than harder bushings. Replacement bushings are available for a reasonable cost.
Additional Info
Weight, 1 1/8"
417 g, 0.92 lbsStock Weight (2023+ KTM Model)
436 g, 0.96 lbsStock Weight (2024+ Triumph Model)
390 g, 0.86 lbs
